We present a near-infrared optical parametric chirped-pulse amplifier (OPCPA) and soft X-ray (SXR) high-harmonic generation system. The OPCPA produces few-cycle pulses at a center wavelength of 800 nm and operates at a high repetition rate of 100 kHz. It is seeded by fully programmable amplitude and phase controlled ultra-broadband pulses from a Tisapphire oscillator. The output from the OPCPA system was compressed to near-transform-limited 9.3-fs pulses. Fully characterized pulse compression was recorded for an average power of 22.5 W, demonstrating pulses with a peak power greater than 21 GW. Without full temporal characterization, high-power operation was achieved up to 35 W. We demonstrate that at such high repetition rates, spatiotemporally flattened pump pulses can be achieved through a cascaded second-harmonic generation approach with an efficiency of more than 70%. This combination provides a compelling OPCPA architecture for scaling the peak power of high-repetition-rate ultra-broadband systems in the near-infrared. The output of this 800-nm OPCPA system was used to generate SXR radiation reaching 190 eV photon energy through high-harmonic generation in helium.Luminescent liquid Crystal (LC) material is regarded as the most promising material for polarized organic light emission due to their intrinsic characteristics including orderly alignment and luminescence. Nevertheless, the optical extraction efficiency of LC based organic light emitting diodes (OLEDs) devices still requires significant effort and innovation towards real-world applications. In this paper, we propose the design of a highly linearly polarized light-emission from OLEDs with integrated refractive index nanograting in the emissive layer (EML) based on photo aligned luminescent liquid crystal material. The simulation results indicate that the geometrically optimized polarized device yields an external quantum efficiency (EQE) up to 47% with a polarized ratio up to 28 dB at a 550 nm emission wavelength. This conceptual design offers a new opportunity to achieve efficient polarized organic luminescence, and it is (to the best of our knowledge) the first approach that enhances the light extraction of OLEDs based on luminescent liquid crystal via index grating in the EML.Photonic technologies are promising for solving complex tasks in artificial intelligence. In this paper, we numerically investigate decision making for solving the multi-armed bandit problem using lag synchronization of chaos in a ring laser-network configuration. We construct a laser network consisting of unidirectionally coupled semiconductor lasers, whereby spontaneous exchange of the leader-laggard relationship in the lag synchronization of chaos is observed. We succeed in solving the multi-armed bandit problems with three slot machines using lag synchronization of chaos by controlling the coupling strengths among the three lasers. Furthermore, we investigate the scalability of the proposed decision-making principle by increasing the number of slot machines and lasers. This study suggests a new direction in laser network-based decision making for future photonic intelligent functions.Spectral absorptance of a metal-semiconductor-metal (MSM) thin-multilayer structured thermo-photovoltaic cell was experimentally investigated. A MSM consists of a thin GaSb-semiconductor sandwiched between a top fishnet-type electrode and a flat backside electrode made of gold. A thin GaSb layer was grown on a substrate made of InAs using molecular beam epitaxy, and then all of the InAs substrate was removed using wet etching. The GaSb film was bonded on a surface of gold, which was sputtered on a Si substrate, using a van der Waals bonding method. The top fishnet-type electrode was made using electron beam lithography and a lift-off process. BLU 451 In the case of a 115 nm thick GaSb layer and a square fishnet aperture of a 300 nm × 310 nm size, the spectral absorptance of MSM reached a local peak (95%) at a wavelength of 1.66 µm, which is similar to spectra predicted by numerical simulation. Moreover, the equivalent resonance cavity model and LC circuit model functioned well to indicate the wavelength of several distinct peaks of absorptance.In this work, we demonstrate the high-throughput fabrication of 3D microparticles using a scanning two-photon continuous flow lithography (STP-CFL) technique in which microparticles are shaped by scanning the laser beam at the interface of laminar co-flows. The results demonstrate the ability of STP-CFL to manufacture high-resolution complex geometries of cell carriers that possess distinct regions with different functionalities. A new approach is presented for printing out-of-plane features on the microparticles. The approach eliminates the use of axial scanning stages, which are not favorable since they induce fluctuations in the flowing polymer media and their scanning speed is slower than the speed of galvanometer mirror scanners.We propose an alternating current (AC) field operation scheme by using an asymmetric voltage waveform to improve the electroluminescence property of AC field-induced electroluminescence (AC-FIEL) devices. Hole injection and transport can be improved by carbon nanotubes (CNT) doping into the emission layer of an AC-FIEL structure operated by a single electrode for AC-responsive alternating carrier injections. However, under an AC operation, highly unbalanced charge transports are inevitably present in CNT-doped AC-FIEL devices due to faster carrier paths through CNTs. Compared with symmetric waveform, asymmetric waveform can be adjusted to allow longer relative duty time for faster carriers in which the luminance level of CNT-doped AC-FIEL devices can be improved by 1.4 times at the same device structure and operation frequency condition.An actively reconfigurable broadband terahertz (THz) metamaterial functional device based on the phase-change material vanadium dioxide (VO2) and two-dimensional graphene material is theoretically proposed and demonstrated. The device has excellent tolerance under oblique incidence. When the VO2 is in the metallic state, and the Fermi energy of graphene is fixed at 0.1 eV, the designed device acts as a broadband THz absorber in the transverse magnetic (TM) polarization mode. The absorptance bandwidth exceeds 0.55 THz with a complete absorption intensity of more than 90%. In this state, the absorber operates as a broadband modulator with the total modulation depth exceeding 91.5% as the continually decreased conductivity of VO2 from 200000 S/m to 10 S/m. In the transverse electric (TE) polarization process, the structure behaves as a dual-band absorber with two perfect absorption peaks. When the conductivity of VO2 is changed, the tunable absorber can also be regarded as an absorptance modulator, with a maximum modulation intensity of 92.